>

  Home  >   Solution Lines  >   Grain Processing Machinery  >   GF2000 Roll Grinding Fluting Machine   

 GF2000 Series
 
Combined Roll Grinding and Fluting Machines

  For the accurate grinding & fluting of all cast iron rolls upto 650mm diameter and 1500mm length

Click here for more pictures

FEATURES

  • Modern hydraulic system allowing smooth, continuously variable table speed for optimum utilization of cutting speed.
  • Change from grinding to fluting position in a few minutes.
  • Accurate spiral percentage setting with the help of spiral scale attached with the machine.
  • Number of flutes (150 1800*) easy to set by exchanging the change gears.
  • Convenient operating height of grinding and fluting head.
  • Adjustable roll back rest makes for exact centering of the roll to ensure efficient grinding and fluting results.

     * GF2006 model only


COMBINED ROLL GRINDING AND FLUTING MACHINE

  • A substantial cast iron bed forms a rigid base upon which the table travels. The machine bed is provided with a levelling device.
  • The grinding and fluting head is mounted at a convenient height on a base bolted to the machine bed. The head can be easily changed from the grinding to the fluting position.



WORKING

  • The roll is installed in the adjustable back rest and linked to the roll drive coupling. The useful length of travel of the table is limited by the adjustable stops, which at the time automatically reverse the table.
  • The cutting toll is fastened to the rigid support and is fed to the roll. Two cutting tools can be used at a time.
  • The turning movement from one flute to the next is effected automatically by the carriage movement and pitching mechanism.
  • Individual drives for roll, grinding wheel, hydraulic pump and coolant pump with complete electrical equipment and panel board.
  • Specially designed grinding head, spindle consists of 4 heavy duty ball bearings (2 on each side of the grinding wheel) to ensure very precise work.



TECHNICAL SPECIFICATIONS

Click to open full technical datasheet

MODE L

WORKING CHARACTERISTICS

MOTORS

WEIGH T

DIMENSIONS

ROLL SIZE

END USE

 

FLUTING CUTTING SPEED (METRE/ MIN)

ROLL FLUTE NOS.

GRINDI NG WHEEL DIA (MM)

RPM

HYD. PUM P (HP)

GRIND -ING WHEE L (HP)

ROLL DRIVE (HP)

NET
 (KG)

L (MM)

W (MM)

H
 (MM)

DIA (MM)

SHELL LENGT H (MM)

SPINDLE LENGTH ONE SIDE (MM)

GF2000

2.50

150 1200

350

1400

3

5

2

4500

3700

1400

1800

400

1250

400

FLUTING & POLISHIN G

GF2006

1.75

150 1800

400

1400

5

5

5

5000

4500

2000

2000

600

650

1300

1500

500

500

FLUTING

POLISHIN G

Indopol reserves the right to changes in technical design and specifications at all times due to continuous product development.

Leaders in Milling Equipment and Turnkey Solutions
Economical Worldclass Solutions
Indopol Group
INDOPOL GROUP

Home Contact UsTerms of Use

Copyright © 2016 All Rights Reserved. Indopol Group of Companies.

  Home

  About Us

  Solution Lines

   Grains & Pulses

   Rice Mill Engineering

   Milling Automation

   Extrusion Systems

   Grain Processing Machinery

     Roll Grinding/Fluting Mach.

     Roller Mill Body RM04

     Length Grader

     Plansifter

     Bran Finisher

     Classifier Separator

     Entolator

     Drum & Impact Detacher

     Horizontal Sieve Machine

     Classifer Separator

     Rotalipser Separator

     Destoner

     Gravity Separator

     High Speed Scourer

     Purifier

     Intensive Dampener

     Uniflow Cylinder

     Jet Filter

     Cracker Roller Mill

     Fans

     Hammer Mill

     Airlock Rotary Valve

     Sack Cleaner

     Drum Sieve

     Aspiration Cyclone

     Volumetric Measurer

   Material Handling

   Fortified Blended Foods

  Services

  Further Information

  Client References

  Contact Us